How does the chip programming hardware work

Handy baby key portable car key programmer for 4D / 46/48 chips

It also has the function of G-Chip copy by authorization.

Note:
1. Language: English / Italian
2. This device does not work with CN1 or CN2 chips, but requires chips that have been specially developed for the programmer, the Handy Baby Chip 4C / 4D and the Handy Baby ID46 chip.
3. Online update on the official website.
4. When you receive the programmer, please provide the serial number with the picture to get permission to copy the G-chips.

Recognizes chips 13, 40/41/42/44/45, 4C / 46/48, 4D61 / 62/63/67/68/68/71.

Can tell whether the chip 48 is original or cloned.

Copy the 46, 4D chips and partly the original IE Buick Excelle 48 chip, special GMT46 / 4D chips must be used and ID48 chips that can change the ID.

Surgery:

SWITCH ON: Long press the "On" button.
SWITCH OFF: Long press the "On / Off" or "On / Off" and "OK" buttons
The steps to operate: Follow the suggestions on the screen, insert the original key into the spool and press "OK" to recognize.

Take chips 46, 4D, and 48, for example.

Steps to copy 46:

1. Press the OK button to decode
2. Place the antenna near the coil
3. Insert the key and turn it
4. Place the original key on the roll to decrypt it
5. Paste the new spool key for copying

Steps to copy 4D:

Press the "OK" button to decode and then place a new key on the spool to be copied.

Steps to copy 48:

Press the "OK" button to decode and then place a new key on the spool to be copied.

Handy initialization programmer for Baby Key Copy:

Please use with caution: only available for JMD46 / 4D and the reworkable UID48 chip. The data will not be restored after erasing the chip.
Insert program, select chip type, press "OK" to restore the factory settings.

Handy baby key frequency copy test programmer:

Button remote frequency test procedure: Enter the program, press the button near the surface of the left button, meanwhile, press the remote control button. The frequency is displayed.

Handy Baby Key Copy programmer for reading and writing data:

1) Read and write 46 chips

1. Please select the correct chip mode and password in order to read and write the integrated circuit correctly. The default mode and password for device chips is 46 blank chips.
2. Select the chip mode: Move the mouse pointer to "Mode" ie "Plain Text Mode", press "OK", the characters will turn white from black to indicate the selection mode, press "Up" and "Down" on Select plain text mode or password mode.
3. Enter the password: in the mode, move the cursor to the password field, press "OK" to continue, press "Up" and "Down" to select the data (0`F), press " left "and" right "for the password transfer.
4. To exit, press "OK" to exit, then move the cursor to "Read All" to read the data.
5. Read More
6. Write: write the appropriate data; Make sure 46 is unlocked before writing any data.
7. Enter data: Entering data corresponds to entering the password.

2) Read and write 48 chips

1. Read: Read 48 UID chips, User 1 and 2 data users, and 48 chip-type indicators, and the status "Locked" or "Unlocked"
2. Write: Write the relevant area data. Make sure 48 is unlocked before writing any data.
3. Enter the data: Move the cursor to the data entry field, press "OK" to continue, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer the data password. When you are finished, press the OK button to exit. Move the cursor to "Write" to write the data.
4. Unlock: If the chip is locked, it must be unlocked before writing any data.
Step 5: If the chip is read as blocked, please enter the PIN code, which is the 48-chip code. Move the cursor to "Unlock" and press "OK" to unlock.

3) 4D integrated circuit read and write

1. Read: Read the 4D chip password, recognition and identification data and also see their unlocked or locked status.
2. Enter the data: Move the cursor to the data entry field, press "OK" to continue, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer the data password. When you're done, press OK to exit. Move the cursor to "Write" to write the data.
3. Write: Write the relevant area data. Make sure 4D is unlocked before writing any data.
4. Lock: Lock the relevant area. Note: Cannot be unlocked after locking.
5. Auto Ignition Control: Enter the verification code and the appropriate signature will be returned.

4. Other integrated circuits

Can recognize 13.40 / 41/42/44 / 45.4C / 46 / 48.4D61 / 62/63/67/68/68/71 chips
Can use T5575, em4305 and compatible cards to copy 13 chips.

5. Create an integrated circuit

Chips 67 and 68: To generate you need the unlocked 4D chip.
Specialized 48 Chip: Can generate chips for Seattle TA, TA VW, Skoda TA, TA Audi, Sitz TP, VW TP, Skoda TP, Audi TP and Jetta
Handy display baby software:

Do not hesitate to contact me for any information or advice